The countdown to New Year’s has started, and speaking of countdowns… there’s only one easy way to cook... mm to scan all your film before you pop your champagne open! Here is the recipe and some pictures. INGREDIENTS 1 DSLR camera (can be be substituted with mirrorless) 1 Macro Lens - Sigma 70 mm Art DG is recommended 1 Benro Geared Head 1 Lens coral 1 "Pixl-latr film holder" 1 6x6 cm glass mirror 1 Flashlight with an extension cable 1 tripod with geared central column 1 remote control or tethering cable 1 (optioanal) camera battery powered from USB source 10 SD cards 3 frames "Vlads Test Target" 0.5 yard of masking tape 1 bottle of Champagne Madame Clicquot - can be substituted with 2L bottle of Coke or Pepsi Preparation time: 15 minutes Scanning time: from 12 am Jan 1 till no film to digitize left. INSTRUCTIONS For the holder: Assemble Pixl-latr film holder as shown, install legs and diffuser. Affix Pixl-latr film holder with the masking tape to the large piece of

So here is my scan rig tuning workflow if anyone cares: Aligning camera and film holder with the  Vlads test target as generator of the test image. The picture is to grab you attention. I used to see it often on my TV when I was 7 years old and was waiting to watch my favorite animated movies which would open the broadcast at 4 o'clock Moscow time . Prepare your scanning rig - whether it's a copy stand or camera bellows with vintage film holder from Nikon, Canon, Minolta, etc. I will assume that camera and lens are able to slide forth and back in relation to a film holder. Ideally you should use micro-focusing rail. Having Arca-swiss clamp sliding on the rail is possible but you will discover that when you start tightening the clamp once focus is achieved, the image will jump by 1-2 mm - pretty significant and irritating shift given overall frame size.    Keep the film gate empty. Adjust lights, mask out stray light, optionally tether your camera to the computer and connect you