Vlads Test Target has addition to the family - “35 mm alignment strip” "35 mm alignment strip” is the high precision test target executed via high-fidelity laser printing on specialty Agfa-Gevaert photographic film. Because of how it's made, the image elements are geometrically perfect - lines are straight and parallel to each other, the fine raster is very uniform and is distortion-free.   IMG_20221225_153412141.jpg What does that bring to the field of camera scanning? The target geometrically resembles a 35 mm film strip (type 135). All markings on film are per the spec, including the 24x36 mm frame which corresponds to the typical film camera gate. While positioning the strip in a scanning film holder, user can observe exactly how the actual negative will fit in the film holder and any parts which might be exposed or obscured. IMG_20221225_154220492.jpg The target also contains marking 23x35 mm depicting how a typical mount would mask parts of the frame to remove the edge...

My article   Zen and the Art of Camera Scanning or The Brief History of Vlads Test Target  is now live on 35mmc.com

I have a customer who is going to use @VladsTestTarget to calibrate the height of  Epson V850 flatbed scanner's film holders.  Hope that will be helpful to other folks too. Here is the question and below is my answer.   Q. "I am ordering this target to calibrate the height of my Epson V850 flatbed scanner film holders. Currently I am not satisfied with my film holder height adjustment attempts. I seems to unable to reach the peak of sharpness. My type 120 slides are all tack sharp on the light table with 6x loupe, but not so in the scanned output. Once I load test target in my scanner, I will evaluate a series of scans at different settings with my naked eye on my computer screen. One thing I am afraid of now is that I may not notice differences among 10~20(?) scans. I can narrow down the short list, but I am afraid I can hardly pinpoint which one or two scans are the absolute best in terms of sharpness. How can test targets help?" A.  Dear fellow digitizer! Please r...